DIY Beolab 6000 Wood frets STL included

23 replies

cgh

Bronze

Posted February 28, 2024 at 03:23 GMT

In the "DIY Beolab 8000 Wood frets (STLs included)." several people have been asking for frets for Beolab 6000 and I decided to give it a try. Attached is the fret needed. 4 is needed for each speaker and they will fit nicely in the grooves for the normal cover. The grooves are for 5mm wood, and there are 10 grooves i.e. 10 length of wood is needed plus two on the sides for each speaker. The attached file has to be renamed to stl - it is not a pdf. See below the fret mounted on the BL6000 Fret

Attachments (2)

cgh

Bronze

Posted February 28, 2024 at 03:23 GMT • Edited March 1, 2024 at 07:20 GMT

#21920

I found that the fret when mounting at the Tweeter covers it partially. So I made a replacement fret for this one. See below before and after. Attached is the new fret in stl format. After downloading please remove the pdf in the end.

matiasjensen

Bronze

Posted February 28, 2024 at 03:23 GMT • Edited March 6, 2024 at 10:20 GMT

#21921

Hi Claus Is it possible for you to make clamps for beosound Stage?

BramBoerema

Bronze

Posted February 28, 2024 at 03:23 GMT • Edited March 18, 2024 at 06:33 GMT

#21922

Hello, What are the things that have to be changed at the stl file?

BramBoerema

Bronze

Posted February 28, 2024 at 03:23 GMT • Edited March 20, 2024 at 06:45 GMT

#21923

Hello, I only have the files for the beolab 6000 that are given in this forum. I dont have files made at my own.

BramBoerema

Bronze

Posted February 28, 2024 at 03:23 GMT • Edited March 20, 2024 at 06:47 GMT

#21924

My message was a reply on the post of you.

sharknm

Bronze

Posted February 28, 2024 at 03:23 GMT • Edited March 28, 2024 at 10:32 GMT

#21925

Thank you for this. Mine are mark 1 as well and I will wait for the bottom one. I have a question, is there any chance to match it with 8000 frets, where the 4mm gap is used? Thank you

matiasjensen

Bronze

Posted March 2, 2024 at 14:15 GMT

#22002

Hello Cgh, Thank you for sharing files with us! :-) I’ll give it a try on mine BL6000 asap :-) BR Matias

cgh

Bronze

Posted March 6, 2024 at 16:28 GMT

#22075

As I don't have a beosound stage available for measuring I do not know what to construct. Br cgh

MagnusMJ

Bronze

Posted March 8, 2024 at 14:44 GMT • Edited March 8, 2024 at 14:44 GMT

#22100

Hi cgh Do you have the dimensions for the wood pieces needed for the project? Length, width, thickness. For both middle and end piecees?

Post a Reply

Attach Files

Choose Files

Max 10MB per file. Images, videos, PDFs, documents, archives, and 3D models accepted.

Please Log In to Reply

You must be logged in as a BeoWorld member to post replies to forum threads.